When professionally installed and properly cared for, high-quality interior vinyl wrap can last between 5-10 years. Longevity depends on a few factors — such as the surface preparation, the quality of vinyl used, daily wear and tear, and how well it’s maintained.

At Prime Kitchen Wraps, we use premium-grade architectural vinyl designed to withstand heat, moisture, and everyday kitchen use. With gentle cleaning (no harsh chemicals or abrasives) and normal care, your wrapped kitchen will stay looking fresh and modern for many years without peeling, fading, or lifting.

The manufacturers warranty is 5 years so your backed up under the warranty during this period.

Costs vary depending on the size of your kitchen and the materials chosen.

----------------------------------------

Estimate price for a medium size kitchen excluding benchtop 2-3 days approx install time.

• Vinyl supply + Installation
• All doors, drawers
• Side panels, trims, kickplates

estimate $3575 ex GST

----------------------------------------

Estimate price for a medium size kitchen including benchtop 3-4 days approx install time.

• Vinyl supply + Installation
• Including an L shaped benchtop
• All doors, drawers
• Side panels, trims, kickplates

estimate $4300 ex GST

----------------------------------------

Estimate price for an L shaped benchtop only. 1-2 days approx install time.

• Vinyl supply + Installation
• Including an L shaped benchtop

estimate $1300 ex GST

----------------------------------------

It’s one of our most frequently asked questions and the answer is always the same. Yes but you will see the grout lines.

We offer an alternative of a marble finish sheet that can be pre-cut and installed ontop of the tiles with adhesion of silicone.

DISCUSSIONS

Architectural films are an excellent choice for enhancing the aesthetics and functionality of interior spaces. From decorative films to privacy solutions, architectural films offer versatility and durability. However, to ensure their longevity and optimal performance, proper maintenance is crucial. Today, we’ll share essential tips on how to effectively maintain architectural film in interior spaces, keeping them looking pristine for years to come.

Regular Cleaning

Regular cleaning is the foundation of maintaining architectural film in interior spaces. Start by removing any loose dirt or debris from the film surface using a soft brush or a microfibre cloth. Then, prepare a solution of mild soap or detergent and warm water. Dip a soft cloth or sponge into the solution and gently clean the film, avoiding excessive pressure or scrubbing. Rinse the film thoroughly with clean water and dry it with a soft, lint-free cloth.

Avoid Harsh Cleaning Agents

When cleaning architectural film in interior spaces, it’s crucial to avoid harsh cleaning agents that can damage the film. Avoid ammonia-based cleaners, abrasive solutions, solvents, bleach, or any cleaners containing alcohol. These chemicals can cause discolouration, deterioration, or even peeling of the film. Stick to mild, non-abrasive cleaning solutions specifically recommended by the film manufacturer.

Handle with Care

Architectural films are designed to be durable, but they still require careful handling. When cleaning or performing maintenance tasks, handle the film with care to prevent damage. Use smooth, controlled movements and avoid applying excessive force or pressure on the film surface. Be cautious of sharp objects or jewellery that could scratch the film. If unsure about handling a specific area or cleaning technique, consult the manufacturer or a professional for guidance.

Address Stains and Spills Promptly

Accidental spills are always going to happen, but prompt action can prevent permanent damage from occurring. If a spill happens, gently blot the affected area with a clean, absorbent cloth or paper towel. Avoid rubbing, as it may spread the stain. For stubborn stains, use a mild cleaning solution recommended by the film manufacturer, following their instructions carefully. Test any cleaning solution on a small, inconspicuous area before applying it to the stained portion.

Protect from Sharp Objects and Abrasion

To maintain the pristine appearance of architectural film, it’s important to protect it from sharp objects and potential abrasion. Avoid dragging sharp-edged items or abrasive materials across the film surface, as they can cause scratches or damage to the film’s finish. Use coasters, placemats, or protective pads under objects that may come into contact with the film, such as furniture or decorative items.

Regular Inspections

Perform regular inspections of the architectural film in your interior spaces to identify any signs of wear, damage, or peeling. Check the edges and corners of the film, as they are more prone to lifting. If you notice any issues, such as bubbling, discolouration, or peeling, contact a professional installer or the film manufacturer for guidance on repair or replacement.

Proper maintenance is essential for preserving the beauty and functionality of architectural film in interior spaces. By following these tips and implementing a regular cleaning routine, you can ensure that your architectural film continues to enhance the aesthetics of your interior while providing long-lasting performance. Remember to consult the manufacturer’s guidelines and seek professional assistance when needed to address any specific concerns.

Kitchen vinyl wrapping involves covering your existing kitchen cabinet doors, drawer fronts, and panels with high-quality adhesive vinyl. It’s a cost-effective, non-invasive way to transform your kitchen without replacing your cabinets or going through a full renovation.

Yes – for many homeowners, vinyl wrapping is the better choice. Unlike respraying, vinyl:

Doesn’t require sanding or fumes

Is cleaner and quicker to install

Can be easily removed or replaced

Offers more texture and finish options (like woodgrain, marble, or matte)

Vinyl wrapping is less disruptive, more affordable, and just as visually stunning.

Absolutely! We offer a huge range of vinyl colours, patterns, and textures including:

High gloss finishes (white, grey, black)

Matte and satin options

Woodgrain effects

Marble and stone-look vinyl

Concrete, metallic, and more

We bring physical samples to your quote appointment so you can see and feel the options in your space.

Yes. The vinyl we use is heat-resistant up to 75–85°C and completely waterproof. It's ideal for kitchens, bathrooms, and laundries. We always advise using trivets or boards for hot pots and pans to maximise the life of your wrap.

Most kitchens are completed in 2-3 days, depending on size and complexity. There’s no waiting for paint to dry, and you can use your kitchen right away – no downtime, no mess.

Yes. For the best results, we remove the doors and panels, clean and prep them, and apply the vinyl on a flat surface. This ensures no creases, bubbles, or peeling. Everything is reinstalled carefully once wrapping is complete.

We can wrap over most surfaces as long as they’re structurally sound. Small chips, scratches, and minor peeling can be repaired prior to wrapping. We’ll inspect everything during your free quote and advise you on what’s possible.

Yes – vinyl wraps can be removed without damaging your underlying surfaces. This makes vinyl wrapping a great option for renters, home sellers, or those who like to refresh their space every few years.

Yes! We regularly wrap bathroom vanities, laundry cupboards, and even wardrobes. The vinyl is waterproof and perfect for wet or high-humidity areas.

We’re based in Brisbane and service:

Brisbane City & Surrounding Suburbs

Logan, Ipswich, and Moreton Bay

Redlands and Bayside Areas

Sunshine Coast and Gold Coast (on request)

If you're unsure if we cover your area, just get in touch!

Yes – The vinyl itself also comes with a manufacturer’s warranty of up to 5-10 years (depending on the brand and finish selected). All our work is backed by a 30 day workmanship warranty. 

We wrap cabinet doors, drawers, panels, trims, kickboards, and can also wrap benchtops and splashbacks.

Not if the surface is sound and prepped right. We deep-clean, degrease, use heat-forming tools, and seal edges. The wrap is designed for kitchens — heat, steam, daily wiping — so lifting is rare when it’s installed professionally

Straight away. There’s no drying time like respraying. We’re in and out, and you can use the kitchen the same day

Totally. Some people do just doors and drawers, others do panels and kickboards to match, and plenty also wrap benchtops or splashbacks. We’ll quote based on what you want done

Different method, but for most kitchens wrapping wins — faster, no fumes, no sanding mess, and you’re not without doors for weeks. It’s also more consistent because the finish is factory-made film, not paint in a home environment. Plus its more durable as vinyl is PVC so won't chip and damage like paint.

Main thing is a proper clean and clear-out. We’ll send a checklist, but basically: empty benches, clean doors/drawers/kicks of grease, and give us clear access for two to three days. The cleaner and smoother the surface, the better the finish

Step 1: fill the online quote form.

Step 2: We confirm colours/finishes and lock a date.

Step 3: We wrap onsite — usually 2–3 days — and you’ve got a brand-new looking kitchen

Wipe with a soft cloth + mild soap. Avoid abrasives, harsh chemicals, and scrubbing pads

Direct heat (pots/pans), sharp impacts, and harsh cleaners.